Standard Features

• Carbon coated steel frame

• 4”x40” and 8”x40” TFC spiral wound membranes

• Stainless steel multi-stage pump, vertical type

• 4”x40”, 8x40” and 8”x80” FRP membrane housings

• 5 micron prefilter

• Control panel

• Programmable time delay and set points

• LCD screen

• Motor starter

• Low pressure switch

• Liquid filled pressure gauges

• TDS meter

• Flow meters

• Factory tested to insured quality

• 1 Year warranty​

Reverse Osmosis

Reverse Osmosis (RO) is the best technology for drinking water purification. The raw water with the pressure is filtered by RO membrane. 
Only water molecules can pass through this membrane while others impurities which partilcle size is bigger than 0.0001 micron are removed,
including ions, heavy metals, sa
lts, dissolved solids, organic compounds, bacterias and viruses.

RO Membrane

RO membrane is made of Thin Film Composit with pore size of 0.0001 micron. To purify water by RO membrane, the natural osmosis effect must be reversed. In order to force

 the water of the brine stream (high salt concentration) to flow towards the fresh stream (low salt 

concentration), the water must be pressurized at an operating pressure greater than the osmotic pressure. As a result, the brine side will get more concentrated.

Feed water requirements

• Max feed water temperature: 45 OC
• Max Turbidity: 300 NTU
•  Max TDS:

1000 ppm (Tap water)

3,000 ppm (Brackish water)
5,000 ppm (Seawater)
 

• Max Iron content : 0.05 ppm
• Operating pressure: 150- 250 psi
• pH tolerance : 2-11