จำหน่ายฮีทเตอร์และอุปกรณ์ 

• Infrared and ceramic heater
• Immersion heater
• Tubular heater, Tubular fined heater
• Mica strip heater, Mica band heater
• Cartridge heater, Ceramic band heater
• Thyristor power regulator-SCR
• Solid state relay-SSR HEATERS ACCESSORIES

จำหน่าย Thyristor power regulator หรือ SCR power regulator W5 series อุปกรณ์ควบคุมการจ่ายกำลังไฟฟ้าสำหรับฮีตเตอร์

คุณสมบัติ

• Independent adjustment of Max and BIAS.
• Down-opened Panel, easy for fuse replacement.
• VR of Max and SFS are installed in the front panel, easy for adjustment.
• Multi-LED display panel makes the operating condition clear.
• The auxiliary powers AC1, AC2 are independently controlled for all models.
• Build-in buffering output adjustment SFS VR, adjusting range 1-22 seconds (only for the phase control product)
• Top & bottom shielding cover are designed for safety and fashion out looking, also easy for wiring installation.
• In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse burn-down.
• Main power is one spec. Design for 200VAC to 480VAC.
• Automatic power frequency detection for 50Hz. To 60Hz. No need for selection or switch.
• Automatic detection and display for power out-of-phase, SCR overheating, and fuse burn-down with one set of alarm dry contact output.
• In cases of SCR overheating or fuse burn-down, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse burn-down.
• 4-20mA, 1-5VDC, 2-10VDC, 0-20mA, 0-5VDC, 0-10VDC, dry contact points, etc. and all control signals are ready to use.
• Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions.
• Using European detachable control signal connector for easy replacement without re-wiring installation.

ดาวน์โหลดข้อมูล คลิก!!

การใช้งาน